Room Lighting

As we know that lighting is one important factor in beautifying the home. By providing good lighting, it will be good also display the object and if the lighting is not good object will look less good. The question is, how do I get the lighting done?

There are three things that must be understood in order to successfully organize the light:
1. Luminous intensity
It is determined by the needs that exist within a space . Irradiation which is important in a space which irradiation suitable for a particular job and exposure to beauty . Each of these activities require different light intensities
2. Color of light
Depending on the impression you want to display of an object
3. Composition 
The arrangement and the exact composition of the use of general lighting , task lighting , and decorative lighting . It takes sensitivity , creativity , and a sense of high art.






What are the stages in the arrangement of light?
1.       Create lighting concepts used
2.      Determine the placement of the lights and pour point in the draft
3.       Determine the type of light required and the strength ( intensity ) adapted to the activities undertaken in space
4.       Analysis of existing objects , in order to determine the appropriate reflected light
5.       Discover the corners of the room to draw on laying decorative lamps add to the aesthetics
6.       To test and improve the design of the turn , move, reduce , even adding light points to achieve the most satisfactory lighting
7.       Must remain creative and frugal as needed
Lighting room - Errors in regulating lighting

 The light is too harsh ,, there are two things that caused this . That is a mistake in selecting the lamp ( wattage too big ) and errors in directing the light , so that light reflection is not as expected .
Over load switch power ,, shall in a maximum of 4 lights. This is to prevent waste , because the lights will go unused lights up if it is in one switch .
The physical size does not fit ,,, lamp house with the house lights bulbs do not fit , so the effect of light is supposed to look good will be badly hindered by the size of the light that is too large .
Laying down the wrong ,, error to determine the angle / a suitable place to put the lights , so light does not just highlight the beautiful part .
 [Source >> Serial Home ]